Mô tả ngắn:
Hệ thống kiểm tra X-ray để bàn chất lượng nhất
Hệ thống kiểm tra X-ray TruView™ Prime là hệ thống chụp X-quang cơ giới hóa hoàn toàn, đượcphát triển để đáp ứng những yêu cầu nghiêm ngặt trong phân tích chất bán dẫn, kiểm tra QFN và BGA, kiểm tra lắp rắp điện tử và chất lượng chung. Hệ thống TruView™ Prime là ứng dụng riêng dành cho các vật mẫu có kích thước 12”x12”.
Hệ thống để bàn và vô cùng chất lượng
Trong nhiều năm, các đội kỹ thuật đã phải khó khăn chọn lựa giữa một hệ thông kiểm tra x-ray lớn, cho ra chất lượng hình ảnh tốt với một hệ thống x-quang...
Mô tả ngắn:
Hệ thống kiểm tra yếu tố X-quang nhỏ gọn hoàn hảo
Hệ thống kiểm tra X-quang TruView™ Cube mới là một hệ thống chụp X-quang cơ giới hóa hoàn toàn được phát triển để đáp ứng các yêu cầu chặt chẽ trong lắp ráp điện tử và kiểm tra thành phần. Đối với những nơi có không gian nhỏ hẹp thì TruView™ Cube X-ray sẽ rất vừa vặn trên chiếc bàn trong phòng nghiên cứu của bạn.
Tối ưu và đem lại hiệu quả chi phí
Chúng tôi hiểu rằng quá trình mua một chiếc máy x-quang là rất phức tạp. Trước tiên, bạn cần phải dò tìm trong một núi các thuật ngữ kỹ thuật để...
Mô tả ngắn:
Thông số kỹ thuật máy gắp đặt linh kiện NeoDen 3V
Thông tin chung
NeoDen3V là phiên bản nâng cấp của dòng máy TM245P series.
Máy có 2 đầu hút, 46 khe feeder, hệ thống vision, hệ thống đặt PCB linh hoạt, là dòng máy phù hợp cho chế thử, sản xuất vừa và nhỏ với chi phí đầu tư và sản xuất rất hợp lý.
Đặc điểm
2 đầu hút, hệ thống vision
...
Mô tả ngắn:
NeoDen4--- Máy gắp đặt với hệ thống camera (rail điều chỉnh tự động)
Sản phẩm
NeoDen4 là dòng máy mới rất được mong chờ của Neoden, đây là hệ thống máy gắp đặt tự động cùng hệ thống quét ảnh tự động.
Là một nhà thiết kế và phát triển máy PnP chuyên nghiệp, Neoden them gia ngành công nghiệp SMT từ năm 2010. Neoden 4 bao gồm hệ thống camera kép, rails tự động, feeders điện tự động và 4 đầu hút, hỗ trợ tới linh kiện 0201, BGA, QFN, và có khả năng đáp ứng cho LED 0.8m/1.2m/1.5m LED. NeoDen4 là sư lựa chọn hàng đầu bởi độ chính xác cao, tốc độ, sự ổn...
Mô tả ngắn:
Máy phay khoan mạch Bungard CCD/MTC là dòng máy chất lượng cao với chức năng thay dao bán tự động (MTC = manual tool change).
CCD/MTC khác dòng máy CCD/2 bởi vùng làm việc rộng hơn (325x495mm so với 270x325mm) và bởi bộ điều khiển độc lập.
So sánh với dòng máy ATC, phần mềm sẽ ngắt hoạt động trong suốt quá trình thay dao bằng tay (xoay núm vặn 1/4 vòng, động cơ sẽ hoạt động trở lại và nhớ vị trí trước khi thay dao).
Với đầu khoan mạnh mẽ, thân máy vững chắc, Bungard CCD/MTC hoàn hảo cho việc định tuyến, khắc trên vật liệu nhựa, nhôm hay cá loại thép khác. 19" rack board cũng có thể thực hiện trên máy CCD/MTC.
Thông số kỹ thuật:
Nguồn cấp:
110-240...
Mô tả ngắn:
Titan 3500
Titan 3500 là hệ thống ăn mòn mạch in 2 mặt dạng phun cho các ứng dụng cao cấp.
Hệ thống vòi phun được cấp bằng sáng chế, đảm bảo sự ăn mòn đồng đều trên bề mặt PCB, đồng thời bộ xoay trong toàn quá trình giúp tăng sự ổn định và hiệu quả cho hệ thống.
độ phân giải đường mạch được đưa xuống mức 30μm với độ dầy đồng 40μm.
Vật liệu PVC và PP được sử dụng, tất cả các bộ phận kim loại tiếp xúc với hoá chất đều được làm bằng titanium, e.g. bộ gia nhiệt titanium... Vỏ và bể chứa làm bằng nhựa PVC dày 8mm.
Tất cả dẫn đến một cấu nhỏ gọn chắc chắn của hệ thống. Kết quả ăn mòn cao bởi lưu lượng đồng đều của hệ...
Mô tả ngắn:
EXP 3040 LED
The EXP 3040 LED is a high speed double sided exposure machine mainly designed for high resolution production of printed circuit boards, stencils and clichés in small and medium quantities !
EXP 3040 LED là máy chụp UV hai mặt tốc độ cao được thiết kế phục vụ cho việc gia công mạch in PCB độ phân giải cao, stencil với sản lượng nhỏ, vừa!
02 bóng LED 50 W đặc biệt được tích hợp đảm bảo độ song song của chùm sáng chiếu.
Cấu trúc
Khung nhôm cứng vững, thiết kế cửa trượt bàn đỡ PCB.
Hoạt động
EXP 3040 LED đảm bảo chụp UV tối ưu với mức tiêu thụ năng lượng tối thiểu. Bảng điều khiển cảm ứng cho phép dễ dàng setup các thông số. A touch...
Mô tả ngắn:
HitecPlate2030
Thông số kỹ thuật
HitecPlate2030
Chức năng
Hệ thống mạ điện phân xuyên lỗ (PTH)
Vùng làm việc [mm]
210x300
Nguồn cấp
230 V AC, 50-60Hz
Công suất tiêu thụ [W]
1500
Dung tích...
Mô tả ngắn:
SprintDryer
The SprintDryer can be connected in any way to any type of sprint, with a suitable dryer available for each throughput width of the Sprint series. Of course, you can also use the SprintDryer together with the DL500 or as a stand-alone-unit with or without an underframe and with or without an inlet or outlet table.
First the wet board is pre-dryed in two squeeze zones. After that the board is completely dried in a hot-air stream. The cross flow fan with integrated heating element generates uniform laminar airflow across the whole working width.
The board runs automatically through the drying zones of the SprintDryer.
The speed of the roller drive is continuously adjustable in a wide range. Special beard roller assures a uniform transport of the PCB through the machine....
Mô tả ngắn:
Stenprint 3000
The StenPrint3000 is a manual printing system with a stable base for a high print quality. The solid construction provides clean and reproducible pressure with simple handling, even with small components and fine structures down to 0.5 mm.
It is ideally suited for the production of prototypes and small series.
In the basic model, one-sided and doublesided printed circuit boards can be printed with the help of the magnetic circuit board holders.
For this purpose, the circuit boards are fixed on the base plate and supported by the magnetic circuit board holders. By means of rotary knobs, the print alignment can be performed quickly and easily in X-Y and Theta axis.
A parallel lift ensures a clean separation of the printed...
Mô tả ngắn:
Drills and Routers
High quality, precisely grinded carbide drill and routing bits. All models have a reinforced shank of 3,175 mm and are equipped with a distance ring. The distance from the tip to the upper side of the ring is 21 mm. The ring has a diameter of 7.5 mm and is labeled or color-coded accosding to the diameter. The tools are packaged in resealable plastic boxes.
Tungsten Carbide Drills For drilling PCBs.
Two flutes, righthand turn. Diameter: 0.3 ... 3.0 mm in 0.1 mm increments
Contour Routers - RPU Type
For Aluminium routing/milling. Two flutes, upward swarf ejection, fish tail tipped. On-stock diameters:...
Mô tả ngắn:
Chemicals and Accessories
Stripper for positive and negative photoresists
Special developer for positive presensitized boards
Special developer for ALUCOREX
Developer for negative presensitized boards
Sodium persulfate
Ferric chloride
Stain remover RX 3
Immersion tin SUR-TIN
Green Coat Spray coating for all PCBs
Films and Chemicals for Bungard Filmstar
UV-filter foil, yellow
Tenting resist
Solder mask
Reference pins for CCD
Fixing pins for Hellas/Filmstar
Stripper for positive and negative photoresists This product mainly consists of caustic soda. It helps removing positive as well as negative photoresists from the PC boards. Compared to stripping with solvents,...
Mô tả ngắn:
Rivets
It's so easy - because it's BUNGARD.
With our high quality rivets and our famous FAVORIT you will ever get the best results.
Standard:
Tubular Rivets according to DIN 7340,
Form A
Material:
Copper, blank
New !
For the Bungard CCD we offer special brass tubular rivets with outer diameter 3.0 mm. With a special tool for Favorit you can use these rivets to arrange and fix multilayer boards before pressing.
Similar, but of shorter length are the fixing pins for Hellas/Filmstar to fix the layout to the pcb durcing exposure.
Measures:
Inner diameter
Outer diameter
+/- 0.03 mm
Length
+/- 0.10 mm
Head...
Mô tả ngắn:
SMD Templates
for solder paste application
In SMD-Technology, the question of how to apply the solder paste is gaining more and more importance.
As far as screen printing is concerned, one has to mention the efforts for the preparation and maintenance of the screen as well as the questions of its wear out and of the achieved thickness of the paste.
We think that the actual tendency is to go away from screen printing and move towards printing by templates.
The reasons for this change seem to be obvious. To state only some of a template's advantages, one had to mention the uniformity of the print, the thickness of the transferred paste and the higher durability. But up to now there was one principal problem with templates: They were not easily available.
From now...
Mô tả ngắn:
Alucorex - Presensitized Aluminium
Another word for quality.
From 1981 on we sell under the brand name ALUCOREX our photo-coated anodized aluminium. This product is perfectly suited for front panels, scales, labels and pad printing clichés.
ALUCOREX consists of an aluminium alloy which is anodized in a unique treatment sequence. After anodizing we coat the boards with a specially adjusted, high-resolution and resistant positive photo-coat. To protect the coat from mechanical damage or unintentional exposure we provide the boards with a light protection foil.
Making a front panel from ALUCOREX is simple and safe. The procedure takes only minutes and you need no equipment besides an exposure unit and a developing tray. The main steps,
exposure and
developing take together only 5 minutes.
...
Mô tả ngắn:
Bungard Cotherm®
again available in 1.0mm
For applications requiring an improved heat dissipation (eg LED) Cotherm® is again available in 1.0 mm thickness.
COTHERM® is an insulated metal substrate, consisting of three layers: a base plate made of 1000-2000μm aluminum at the bottom and a 35μm thick ED copper foil on the upper side. Between the two layers there is an electrically isolating layer (FR4) in 100μm thickness, consisting of glass fabric combined with a mixture from epoxy resin and ceramic(s). This layer guarantees a very good thermal conduction, a high dielectric strength and a continuous high temperature resistance. The aluminum base plate is provided with a foil that protects the aluminum during the wet processes of the printed circuit board manufacturing process, in order to prevent a contact bridge between the aluminum and copper.
The metal...
Mô tả ngắn:
Presensitized Boards
A value concept for quality.
Our special quality can be measured in the following facts:
We use first-choice laminates approved and certified by UL, NEMA, DIN, IEC and others.
Several types of laminates such as FR2, FR3, CEM1, FR4 and PTFE are available in different thicknesses and copper clads. FR 4 e.g is available in thicknesses of 0.5, 0.8, 1.0, 1.6, 2.0 and 2.5 mm with either 18, 35 or 70 microns Copper. The max. panel size is 510 x 1150 mm. Our cutting service provides sheets down to 50 x 50 mm min. size, with an accuracy of 0.1 mm.
Photoresist
We coat the laminates with a special positive working liquid resist made after our own recipe. The resist features highest exposure sensitivity, short processing turns and large safety tolerannces. The equal and dust-free...
Mô tả ngắn:
Galvanic Nickel-Gold
The nickel-gold plating-surface is abrasion-resistant and corrosion free and therefore it is often used for components with increased mechanical stress (male).
The resist coated circuit board is first provided with an electroplated nickel layer> 3μm as a diffusion barrier (preventing that the subsequent gold gradually "disappears" by diffusion). After the nickel plating followes by the actual galvanic golding. Gold layer between > 0.4μm to 2μm are deposited. This depends of the purpose. For plugs the number of jacking cycles is applied.
For example:
0.4μm 20 jacking cycles
0.7μm, 50 jacking cycles
1.3μm, 200 jacking cycles
2.0μm, 500 jacking cycles
With additions such as cobalt etc. (will also "Hard Gold" called) th egold layer can be deposited without a nickel diffusion barrier.
Storage:
The shelf life is...
Mô tả ngắn:
Chemical Nickel-Gold (Enig = electroless nickel gold)
Since early 1990s the alloy surface (nickel / phosphorus & gold) is one of the most versatile surfaces. In this method, a nickel layer forms the diffusion barrier between copper and solder alloy. The gold is dissolved in the solder joint and the liability / IMC formation is done with the nickel layer. Electroless nickel-gold requires an upstream copper activation to start the nickel deposition. The nickel layer increases mechanical vias and increases the abrasion resistance.
Layer properties:
low / medium / high P systems (<7, 7-10;> 10% P)
Layerthickness 3 - 6μm NiP and 0.05-0.12μm Au
Autocatalytic nickel deposition
Gold protects nickel from oxidation
Reliable multi-functional surface
suitable for Al-wire bonding
Growth of the nickel-phosphorus layer of activated copper
Advantages:
...
Mô tả ngắn:
Ormecon immersion tin is a method for chemical tin plating of copper surfaces.
The special on Ormecon process is a 0.08 micron thick layer of organic metal, which optimally prepares the surface for subsequent tinning and then prevents the 'diffusion of copper through the tin.
Ormecon ® CSN meets all modern requirements for PCBs:
completely planar surfaces for SMD technology
high storage capacity of bare printed circuit board
Energy and cost savings compared to HASL
can be used in basket systems without a major investment
suitable for horizontal production lines
protects the environment
simple process control and monitoring
all common solder and assembly print varnishes are processed
Additionally Ormecon ® CSN offers the following advantages over other chemical-tin methods:
Deposition of pure tin
Up to 50% longer service life of the tin...
Mô tả ngắn:
Bungard Solder Mask
We offer the typical green surface finish for printed circuit boards in industrial quality.
Our laminate solder mask is an aqueous alkaline processed dry film mask.
It is a transparent, green material, which we provide in 75 microns (3 mil) thickness, 305 mm width and roll lengths of 25, 76 or 152 meters. Special thicknesses and lengths are available on request.
As usual in such resists, the photo-polymer is embedded between a thin polyolefin protective film and a strong 25 micron polyester foil.
Solderstop laminate is suitable for printed circuits boards, consisting of epoxy or polyamide-based materials and which are coated with copper, solder, tin, nickel or gold. Laminate Solderstop is compatible with most soldering processes such as wave soldering, hot air leveling, vapor-phase soldering, infrared soldering, etc., and resistant to most solvents, flux and defluxmedia. Because of...