Mô tả ngắn:
Hệ thống kiểm tra X-ray để bàn chất lượng nhất
Hệ thống kiểm tra X-ray TruView™ Prime là hệ thống chụp X-quang cơ giới hóa hoàn toàn, đượcphát triển để đáp ứng những yêu cầu nghiêm ngặt trong phân tích chất bán dẫn, kiểm tra QFN và BGA, kiểm tra lắp rắp điện tử và chất lượng chung. Hệ thống TruView™ Prime là ứng dụng riêng dành cho các vật mẫu có kích thước 12”x12”.
Hệ thống để bàn và vô cùng chất lượng
Trong nhiều năm, các đội kỹ thuật đã phải khó khăn chọn lựa giữa một hệ thông kiểm tra x-ray lớn, cho ra chất lượng hình ảnh tốt với một hệ thống x-quang...
Mô tả ngắn:
Hệ thống kiểm tra yếu tố X-quang nhỏ gọn hoàn hảo
Hệ thống kiểm tra X-quang TruView™ Cube mới là một hệ thống chụp X-quang cơ giới hóa hoàn toàn được phát triển để đáp ứng các yêu cầu chặt chẽ trong lắp ráp điện tử và kiểm tra thành phần. Đối với những nơi có không gian nhỏ hẹp thì TruView™ Cube X-ray sẽ rất vừa vặn trên chiếc bàn trong phòng nghiên cứu của bạn.
Tối ưu và đem lại hiệu quả chi phí
Chúng tôi hiểu rằng quá trình mua một chiếc máy x-quang là rất phức tạp. Trước tiên, bạn cần phải dò tìm trong một núi các thuật ngữ kỹ thuật để...
Mô tả ngắn:
Thông số kỹ thuật máy gắp đặt linh kiện NeoDen 3V
Thông tin chung
NeoDen3V là phiên bản nâng cấp của dòng máy TM245P series.
Máy có 2 đầu hút, 46 khe feeder, hệ thống vision, hệ thống đặt PCB linh hoạt, là dòng máy phù hợp cho chế thử, sản xuất vừa và nhỏ với chi phí đầu tư và sản xuất rất hợp lý.
Đặc điểm
2 đầu hút, hệ thống vision
...
Mô tả ngắn:
NeoDen4--- Máy gắp đặt với hệ thống camera (rail điều chỉnh tự động)
Sản phẩm
NeoDen4 là dòng máy mới rất được mong chờ của Neoden, đây là hệ thống máy gắp đặt tự động cùng hệ thống quét ảnh tự động.
Là một nhà thiết kế và phát triển máy PnP chuyên nghiệp, Neoden them gia ngành công nghiệp SMT từ năm 2010. Neoden 4 bao gồm hệ thống camera kép, rails tự động, feeders điện tự động và 4 đầu hút, hỗ trợ tới linh kiện 0201, BGA, QFN, và có khả năng đáp ứng cho LED 0.8m/1.2m/1.5m LED. NeoDen4 là sư lựa chọn hàng đầu bởi độ chính xác cao, tốc độ, sự ổn...
Mô tả ngắn:
Máy phay khoan mạch Bungard CCD/MTC là dòng máy chất lượng cao với chức năng thay dao bán tự động (MTC = manual tool change).
CCD/MTC khác dòng máy CCD/2 bởi vùng làm việc rộng hơn (325x495mm so với 270x325mm) và bởi bộ điều khiển độc lập.
So sánh với dòng máy ATC, phần mềm sẽ ngắt hoạt động trong suốt quá trình thay dao bằng tay (xoay núm vặn 1/4 vòng, động cơ sẽ hoạt động trở lại và nhớ vị trí trước khi thay dao).
Với đầu khoan mạnh mẽ, thân máy vững chắc, Bungard CCD/MTC hoàn hảo cho việc định tuyến, khắc trên vật liệu nhựa, nhôm hay cá loại thép khác. 19" rack board cũng có thể thực hiện trên máy CCD/MTC.
Thông số kỹ thuật:
Nguồn cấp:
110-240...
Mô tả ngắn:
Main Features:
1. Embedded industrial control computer windows system. Adopt high definition human-machine interface,PLC control, there is
password protection and modify function, can show 4 -6 temperature curves and store multiple sets of data, with instant curves analysis
function,and analyzing and correct BGA temperature at any time .
2. F or guarantee the heating effect and mounting precision, control independent the top heater and mounting heater,adopted linear slide make X,Y,Z axis can do micro adjustment and rapid positioning;After mounted, no need to move the PCB board in the bottom area, it can heat directly when move the top heater, avoid the moving of...
Mô tả ngắn:
Main applications:
Optical fiber marking machine ZM-FM 20W is widely used in IT industry, telecommunication industry, the mobile phone stainless steel sequins, mould, IC, keys of mobile phone industry, bitmap marking, machine manufacturing, medical equipment, watches and clocks, glasses, gifts, precious metals jewelry, leather clothing etc.
Laser wave length
1064nm
Power adjustment range
10-100%
Repetition frequency
20-100KHz
Output beam quality ...
Mô tả ngắn:
Features:
1、Operation with handheld LCD panel teach box, which is easy to program and learn.
2、Functions of drawing points, lines, surfaces, arc, circle and consecutive interpolation of irregular curves, is to realize any 3D non planar trajectory path.
3、Excellent teaching function, Supporting: array, graphical browsing three dimensional elliptic, common graphical library inserting, group editing and so on..
4、 MINISD file storage with high speed and2Gcapacity can store 999 dispensing process documents.
5、The size of glue, speed of glue spread, dispensing time, and time of halting dispensing can be set by parameters.
6、 With special dispensing controller, glue outflow is quite stable without leaking...
Mô tả ngắn:
1.Point,line (length 50um),block (50um*50um)To repair the mist of polarizing film containing the LCD panel
2.Image photographed, archive and upload
3.Dual display electronic brake light red and red box
4.Light gate size and the parameters of the lens ratio and laser power storage and use
5.No fuse protection circuit breaker protection
1
Working environment temperature
20℃~30℃±5℃
2
Work environment relative humidity
65 + / - 5%...
Mô tả ngắn:
Main Features:
1.The bottom is IR heater; The top is hot-air heater.
2.Choose imported high-precision materials to control the BGA desoldering & soldering procedures precisely.
3.Has a computer communications function, built-in PC serial port, external temperature interface with software
to achieve computer control.
4.High-precision thermocouple to achieve the precise temperature detection.
5.The top and bottom heater work independently. A cross-flow fan cools rapidly to protect the PCB from deformation
when welding.
6.Use a V-groove support equipped with a flexible fixture for PCB positioning to protect the PCB....
Mô tả ngắn:
Main Features:
1. Adopt linear slide which makes X, Y, Z axis all can do micro adjust or rapid positioning, with high precision, within ±0.01MM, easy operation.
2. 3 independent heaters area. The 1st and 2nd hot-air heaters can set multiple groups and segments temperature parameters. The 2nd heater can move up and down. The 3rd large area IR heater can preheat the PCB board fully to ensure no deformation to the board.
3. High-precision K-type thermocouple with closed loop control, PID auto-tuning temperature system, combined with highly sensitive temperature module for the precise temperature control, the temperature error controlled within ± 2 degree
4. The external sensor can detect temperature precisely, analyze and calibrate the real temperature curve accurately. ...
Mô tả ngắn:
Main Features:
1.Adopt liner slide which makes X、Y、Z axis all can do high positioning accuracy and fast maneuverability.
2. PLC control, can save 50 groups profile and analyze instant temperatures curves, equipped with password protection and modify function. The temperature curves can be show on the touch screen. Instantly set and analyze temperature parameter according with repairment need.
3. There are 3 independent heating areas, the 1st and 2nd hot-air heaters, can be set many temperatures parameters and sections at the same time. The 3rd IR preheating, prevent the PCB motherboard cracking, and can be adjusted the power comsumption. Top heater can be adjusted freely; second heater can be adjusted up and down.
The machine operations be runned by...
Mô tả ngắn:
1.Adopt liner slide which makes X, Y, Z axis all can do high positioning accuracy and fast maneuverability.
2. High definition touch screen made fromTaiwan, PLC control, can save 50 groups profile and analyze instant temperatures curves, equipped with password protection and modify function. The temperature curves can be show on the touch screen. Instantly set and analyze temperature parameter according with repair need.
3. There are 3 independent heating areas from top to bottom, the 1st and 2nd hot-air heaters, can be set many temperatures parameters and sections at the same time. The 3rd IR preheating, prevent the PCB motherboard cracking, and can be adjusted the power consumption. Bottom IR heater ensure an even heater for PCB board. Top heater can be adjusted freely; second hot air heater can be adjusted...
Mô tả ngắn:
1,Adopt liner slide which makes X,Y,Z axis all can do precision adjustment or fast positioning, with high positioning accuracy and fast maneuverability,
2,high definition touch screen , PLC control, can save multiple groups profile, password protection and modify function, and can save multiple groups profile, equipped with instant temperature curve analysis function,
3, There are 3 independent heating areas from top to bottom. The 1st and 2nd are hot-air heaters, the 3rd is IR preheating, temperature controlled within±3 °, Top heater can be adjusted freely, second heater can be adjusted up and down, top and bottom temperature can control many groups and sections of temperature parameters at the same time; the third IR heater can be adjusted the power consumption.
4,Offer all kinds of hot-air...
Mô tả ngắn:
1, This machine adopts industrial computer control, full automatic vision alignment system can acquire BGA and the PCB image through the CCD camera and collect them on the image positioning processing system, calculate the offset position and angle through image processing software, then re-transmission to motor drive of servo controller to correct the position, thus completing the BGA placement. Fast response, positioning accuracy is up to ±0.005 MM,with keyboard, mouse and 15 inch HD LCD monitor.
2, During mounting, the machine can automatically analyze, search, modify the location of BGA or PCB, and through the nozzle to automatically pick up BGA and mount it to the specified pad, When desoldering, it can automatically remove the BGA on PCB and place it to the specified location.
3, The upper heater can be moved freely, the system X, Y-axis and R angle...
Mô tả ngắn:
1. Heaters,3 heaters, The 1stand 2ndare hot-air heaters ,and The 3rd is IR heater, which preheat the PCB board fully to prevent deformation .The top heater can move freely along the X, Y axis in the IR preheating area. It is convenient to repair different directions of BGA chips.
Automatic waste gas extraction system and feeding system are optional to be equipped.
2. High-precision K-type thermocouple with closed loop control, PID auto-tuning temperature system, combined with Panasonic PLC and highly sensitive temperature module the temperature error controlled within ± 1 degree.
The external 4-5 sensors can detect temperature precisely, analyze and calibrate the real temperature curve accurately.
3. V type groove, flexible...
Mô tả ngắn:
Main Features:
1, Panasonic servo drives, joystick control, micrometer adjustment, X-shaped infrared laser positioning ,6-8 Rapid heating and cooling settings, automatic feeding ,feeding systems are optional;
2,There are 3 independent heaters. The 1stand 2ndhot-air heaters can control multiple groups and segments temperature parameters. The 2ndheater can move up and down. The 3rdlarge area IR heater can preheat the PCB board fully to ensure no deformation to the board. Temperature, time, slope, cooling, alarming all can be displayed on the touch screen.
3,High-precision K-type thermocouple with closed loop control,automatic temperature compensation system, combined with Panasonic PLC and highly sensitive temperature module for the precise temperature control, the temperature error controlled within ± 1 degree; The external 4 sensors can detect temperature precisely, analyze and calibrate the...
Mô tả ngắn:
3 independent control heaters
1. Integrated design of top heater with efficient ceramic heater; Air source, including compressed air and nitrogen, is changed freely to meet repairing requests.
2. It is convenient to use bottom heater and top heater in the meantime by the system of synchronized operation and electric lift.
3. Large size IR heater, high performance heat pipes and the micro crystal plate so that preheat PCB thoroughly.
Precise optical alignment system
Adopt adjustable CCD color optical system, with a beam split, zoom in, zoom out and micro-adjust functions, has automatic chromatism resolution and brightness adjustment system, can adjust the clearness of the image,
With15”HD monitor. High automatic...
Mô tả ngắn:
Main Features:
1. Adopt ceramic honeycombs heating system, higher efficiency of thermal conversion
2. Adopt infrared ceramic plate radiator heating system, heating rapidly
3. Multi-mode of operation, Mounting, welding, de-welding in one key, easy operation
4. Seven segments of temperature control process, suitable for Lead free BGA Rework.
5. HD Optical alignment system can realize precise mounting of BGA chip.
6. Choose high accurate K-type thermocouple, precise temperature...
Mô tả ngắn:
Main Features:
1. There are 3 independent heaters. The 1st and 2nd hot-air heaters can control multiple groups and segments temperature parameters. The 2nd heater can move up and down. The 3rd large area IR heater can preheat the PCB board fully to ensure no deformation to the board. Temperature, time, slope, cooling, alarming all can be displayed on the touch screen.
2. High-precision K-type thermocouple with closed loop control, automatic temperature compensation system, combined with Panasonic PLC and highly sensitive temperature module for the precise temperature control, the temperature error controlled within ± 2 degree, The external 4-5 sensors can detect temperature precisely, analyze and calibrate the real temperature curve accurately.
3. V-groove PCB support, rapid positioning, convenience, accuracy, can fit for all kinds of PCB board.
4. Flexible and removable...
Mô tả ngắn:
Main Features:
1, ZM-R6200 is the highest cost-effective machine for BGA|SMD rework in Seamark ZM.
2, High automatic,easy operation for BGA rework,SMD rework, micro ic components rework.
3,Good effect of constant temperature heating,longer serve life.
4, CCD camera optical alignment system helps position precisely.
5,Built-in pressure testing device protects the PCB.
6, Laser pointer, fast positioning for PCB.
7, High Definition touch screen( up to 800*600 pixel).
8, Real-time automatic monitoring for all heaters, when accident happens, self-protection function works.
1
Total power ...
Mô tả ngắn:
The machine support PC control.
Top hot air heater is controlled by stepped drive, precise and efficient position.
3rd infrared heater is composed of carbon fiber Pre-heating system, Offer fast and evenly heating and No light pollution.
1、 Temperature parameters protected by limits of authority, for avoiding error settings.Repair
2、 Ten segments of temperature control process, suitable for all kinds of BGA Rework Station.
3、 Unlimited storage of the temperature profile, just need press one key to use the profile.R
4、 Three K-type sensors available can realize the high precise temperature testing of each point of PCB or BGA, and PC can generate...
Mô tả ngắn:
Main Features:
1, ZM-R6500 is the a high-end repair machine for Big Size PCB Motherboard BGA|SMD rework in Seamark ZM.
2, High automatic,easy operation for BGA rework,SMD rework, micro ic components rework.
3,Good effect of constant temperature, longer serve life.
4, CCD camera optical alignment system helps position precisely.
5, High precise temprature control with five K type sensor.
6,Built-in pressure testing device protects the PCB.
7, Laser pointer, fast positioning for BGA chip.
8, High Definition touch screen.
9, Real-time automatic monitoring for all heaters, when accident happens, self-protection function works.
1
Total power
...