Mô tả ngắn:
Hệ thống kiểm tra X-ray để bàn chất lượng nhất
Hệ thống kiểm tra X-ray TruView™ Prime là hệ thống chụp X-quang cơ giới hóa hoàn toàn, đượcphát triển để đáp ứng những yêu cầu nghiêm ngặt trong phân tích chất bán dẫn, kiểm tra QFN và BGA, kiểm tra lắp rắp điện tử và chất lượng chung. Hệ thống TruView™ Prime là ứng dụng riêng dành cho các vật mẫu có kích thước 12”x12”.
Hệ thống để bàn và vô cùng chất lượng
Trong nhiều năm, các đội kỹ thuật đã phải khó khăn chọn lựa giữa một hệ thông kiểm tra x-ray lớn, cho ra chất lượng hình ảnh tốt với một hệ thống x-quang...
Mô tả ngắn:
Hệ thống kiểm tra yếu tố X-quang nhỏ gọn hoàn hảo
Hệ thống kiểm tra X-quang TruView™ Cube mới là một hệ thống chụp X-quang cơ giới hóa hoàn toàn được phát triển để đáp ứng các yêu cầu chặt chẽ trong lắp ráp điện tử và kiểm tra thành phần. Đối với những nơi có không gian nhỏ hẹp thì TruView™ Cube X-ray sẽ rất vừa vặn trên chiếc bàn trong phòng nghiên cứu của bạn.
Tối ưu và đem lại hiệu quả chi phí
Chúng tôi hiểu rằng quá trình mua một chiếc máy x-quang là rất phức tạp. Trước tiên, bạn cần phải dò tìm trong một núi các thuật ngữ kỹ thuật để...
Mô tả ngắn:
Thông số kỹ thuật máy gắp đặt linh kiện NeoDen 3V
Thông tin chung
NeoDen3V là phiên bản nâng cấp của dòng máy TM245P series.
Máy có 2 đầu hút, 46 khe feeder, hệ thống vision, hệ thống đặt PCB linh hoạt, là dòng máy phù hợp cho chế thử, sản xuất vừa và nhỏ với chi phí đầu tư và sản xuất rất hợp lý.
Đặc điểm
2 đầu hút, hệ thống vision
...
Mô tả ngắn:
NeoDen4--- Máy gắp đặt với hệ thống camera (rail điều chỉnh tự động)
Sản phẩm
NeoDen4 là dòng máy mới rất được mong chờ của Neoden, đây là hệ thống máy gắp đặt tự động cùng hệ thống quét ảnh tự động.
Là một nhà thiết kế và phát triển máy PnP chuyên nghiệp, Neoden them gia ngành công nghiệp SMT từ năm 2010. Neoden 4 bao gồm hệ thống camera kép, rails tự động, feeders điện tự động và 4 đầu hút, hỗ trợ tới linh kiện 0201, BGA, QFN, và có khả năng đáp ứng cho LED 0.8m/1.2m/1.5m LED. NeoDen4 là sư lựa chọn hàng đầu bởi độ chính xác cao, tốc độ, sự ổn...
Mô tả ngắn:
Máy phay khoan mạch Bungard CCD/MTC là dòng máy chất lượng cao với chức năng thay dao bán tự động (MTC = manual tool change).
CCD/MTC khác dòng máy CCD/2 bởi vùng làm việc rộng hơn (325x495mm so với 270x325mm) và bởi bộ điều khiển độc lập.
So sánh với dòng máy ATC, phần mềm sẽ ngắt hoạt động trong suốt quá trình thay dao bằng tay (xoay núm vặn 1/4 vòng, động cơ sẽ hoạt động trở lại và nhớ vị trí trước khi thay dao).
Với đầu khoan mạnh mẽ, thân máy vững chắc, Bungard CCD/MTC hoàn hảo cho việc định tuyến, khắc trên vật liệu nhựa, nhôm hay cá loại thép khác. 19" rack board cũng có thể thực hiện trên máy CCD/MTC.
Thông số kỹ thuật:
Nguồn cấp:
110-240...
Mô tả ngắn:
The ABI ChipMaster Compact Professional is a low-cost, hand-held out-of-circuit IC tester. The ChipMaster is designed for testing digital ICs with up to 40 pins through a ZIF socket (see LinearMaster for analogue devices). A range of adapters is also available for SOIC and PLCC devices.
The ChipMaster includes a search facility for unknown ICs, loop modes for intermittent failure detection, diagnostic information for individual pins and self diagnosis for product integrity.
The unit is battery operated (4x AA/LR6) but an optional battery eliminator is available for extended use.
The ABI Compact Range has been recently upgraded and it now fitted with a USB interface to allow connection with a computer and use with the optional software CompactLink. ...
Mô tả ngắn:
The JTAGMaster Tester and Programmer is a fully integrated solution for the configuration and diagnosis of Programmable Logic Devices (PLDs). This unit includes : ...
Mô tả ngắn:
The ABI LinearMaster Compact Professional is a low-cost, hand-held out-of-circuit IC tester. The LinearMaster is designed for testing analogue ICs with up to 16 pins through a ZIF socket (see ChipMaster for digital devices). A range of adapters is also available for SOIC and PLCC devices.
The LinearMaster includes a search facility for unknown ICs, loop modes for intermittent failure detection, diagnostic information for individual pins and self diagnosis for product integrity.
The unit is battery operated (4x AA/LR6) but an optional battery eliminator is available for extended use.
The ABI Compact Range has been recently upgraded and it now fitted with a USB interface to allow connection with a computer and use with the optional software CompactLink. ...
Mô tả ngắn:
RevEng offers an effective method of creating professional quality circuit diagrams from a sample board. The RevEng system comprises a PC controlled continuity measuring hardware system, SYSTEM 8 Ultimate control software and EdWin XP, a fully featured CAD package.
RevEng learns the connectivity of a sample circuit then produces a NetList (a list of the components and connections). The NetList is imported into EdWin XP to create professional quality circuit diagrams.
...
Mô tả ngắn:
The ABI SENTRY is a unique solution for the quick and easy detection of Counterfeit ICs and components. ABI Electronics has over 34 years of experience in the field of Test & Measurement equipment as well as Contract Electronics Manufacturing. Knowledge of both industries has allowed ABI to design this product around two main concepts:
- To offer a simple and easy to use system that can be operated by any personel, and particularly non-technical staff.
- To provide a powerful solution that would lead to the detection of counterfeit devices, thus protecting a business from very high unexpected costs.
...
Mô tả ngắn:
The Multiple Instrument Station MIS4 provides you with all the instruments required for the test and measurement of electronic components and PCBs. This portable, USB driven module can be installed into an ABI USB Multilink Case or even into your existing PC! (please contact sales for details).
ABI’s SYSTEM 8 MIS4, along with the Ultimate software, is a faster and more economical solution than using traditional oscilloscope, metering and other bench test instruments, and can quickly produce the required Pass/Fail or other test and debug results.
The MIS 4 package comes complete with the TestFlow Manager , a step by step sequence generator that guides operators during...
Mô tả ngắn:
The SYSTEM 8 Variable Power Supply provides the necessary supply voltages to the unit under test and allows other SYSTEM 8 modules to be utilised in fault-finding. As it is controlled by the SYSTEM 8 software, the VPS can be switched on/off automatically and the required voltages can be modified within the TestFlow.
The three output voltages are variable in both voltage and current making the Variable Power Supply suitable for a wide variety of applications.
Features
...