Mô tả ngắn:
Hệ thống kiểm tra X-ray để bàn chất lượng nhất
Hệ thống kiểm tra X-ray TruView™ Prime là hệ thống chụp X-quang cơ giới hóa hoàn toàn, đượcphát triển để đáp ứng những yêu cầu nghiêm ngặt trong phân tích chất bán dẫn, kiểm tra QFN và BGA, kiểm tra lắp rắp điện tử và chất lượng chung. Hệ thống TruView™ Prime là ứng dụng riêng dành cho các vật mẫu có kích thước 12”x12”.
Hệ thống để bàn và vô cùng chất lượng
Trong nhiều năm, các đội kỹ thuật đã phải khó khăn chọn lựa giữa một hệ thông kiểm tra x-ray lớn, cho ra chất lượng hình ảnh tốt với một hệ thống x-quang...
Mô tả ngắn:
Hệ thống kiểm tra yếu tố X-quang nhỏ gọn hoàn hảo
Hệ thống kiểm tra X-quang TruView™ Cube mới là một hệ thống chụp X-quang cơ giới hóa hoàn toàn được phát triển để đáp ứng các yêu cầu chặt chẽ trong lắp ráp điện tử và kiểm tra thành phần. Đối với những nơi có không gian nhỏ hẹp thì TruView™ Cube X-ray sẽ rất vừa vặn trên chiếc bàn trong phòng nghiên cứu của bạn.
Tối ưu và đem lại hiệu quả chi phí
Chúng tôi hiểu rằng quá trình mua một chiếc máy x-quang là rất phức tạp. Trước tiên, bạn cần phải dò tìm trong một núi các thuật ngữ kỹ thuật để...
Mô tả ngắn:
Thông số kỹ thuật máy gắp đặt linh kiện NeoDen 3V
Thông tin chung
NeoDen3V là phiên bản nâng cấp của dòng máy TM245P series.
Máy có 2 đầu hút, 46 khe feeder, hệ thống vision, hệ thống đặt PCB linh hoạt, là dòng máy phù hợp cho chế thử, sản xuất vừa và nhỏ với chi phí đầu tư và sản xuất rất hợp lý.
Đặc điểm
2 đầu hút, hệ thống vision
...
Mô tả ngắn:
NeoDen4--- Máy gắp đặt với hệ thống camera (rail điều chỉnh tự động)
Sản phẩm
NeoDen4 là dòng máy mới rất được mong chờ của Neoden, đây là hệ thống máy gắp đặt tự động cùng hệ thống quét ảnh tự động.
Là một nhà thiết kế và phát triển máy PnP chuyên nghiệp, Neoden them gia ngành công nghiệp SMT từ năm 2010. Neoden 4 bao gồm hệ thống camera kép, rails tự động, feeders điện tự động và 4 đầu hút, hỗ trợ tới linh kiện 0201, BGA, QFN, và có khả năng đáp ứng cho LED 0.8m/1.2m/1.5m LED. NeoDen4 là sư lựa chọn hàng đầu bởi độ chính xác cao, tốc độ, sự ổn...
Mô tả ngắn:
Máy phay khoan mạch Bungard CCD/MTC là dòng máy chất lượng cao với chức năng thay dao bán tự động (MTC = manual tool change).
CCD/MTC khác dòng máy CCD/2 bởi vùng làm việc rộng hơn (325x495mm so với 270x325mm) và bởi bộ điều khiển độc lập.
So sánh với dòng máy ATC, phần mềm sẽ ngắt hoạt động trong suốt quá trình thay dao bằng tay (xoay núm vặn 1/4 vòng, động cơ sẽ hoạt động trở lại và nhớ vị trí trước khi thay dao).
Với đầu khoan mạnh mẽ, thân máy vững chắc, Bungard CCD/MTC hoàn hảo cho việc định tuyến, khắc trên vật liệu nhựa, nhôm hay cá loại thép khác. 19" rack board cũng có thể thực hiện trên máy CCD/MTC.
Thông số kỹ thuật:
Nguồn cấp:
110-240...
Mô tả ngắn:
Alucorex - Presensitized Aluminium
Another word for quality.
From 1981 on we sell under the brand name ALUCOREX our photo-coated anodized aluminium. This product is perfectly suited for front panels, scales, labels and pad printing clichés.
ALUCOREX consists of an aluminium alloy which is anodized in a unique treatment sequence. After anodizing we coat the boards with a specially adjusted, high-resolution and resistant positive photo-coat. To protect the coat from mechanical damage or unintentional exposure we provide the boards with a light protection foil.
Making a front panel from ALUCOREX is simple and safe. The procedure takes only minutes and you need no equipment besides an exposure unit and a developing tray. The main steps,
exposure and
developing take together only 5 minutes.
...
Mô tả ngắn:
Bungard Cotherm®
again available in 1.0mm
For applications requiring an improved heat dissipation (eg LED) Cotherm® is again available in 1.0 mm thickness.
COTHERM® is an insulated metal substrate, consisting of three layers: a base plate made of 1000-2000μm aluminum at the bottom and a 35μm thick ED copper foil on the upper side. Between the two layers there is an electrically isolating layer (FR4) in 100μm thickness, consisting of glass fabric combined with a mixture from epoxy resin and ceramic(s). This layer guarantees a very good thermal conduction, a high dielectric strength and a continuous high temperature resistance. The aluminum base plate is provided with a foil that protects the aluminum during the wet processes of the printed circuit board manufacturing process, in order to prevent a contact bridge between the aluminum and copper.
The metal...
Mô tả ngắn:
Chemicals and Accessories
Stripper for positive and negative photoresists
Special developer for positive presensitized boards
Special developer for ALUCOREX
Developer for negative presensitized boards
Sodium persulfate
Ferric chloride
Stain remover RX 3
Immersion tin SUR-TIN
Green Coat Spray coating for all PCBs
Films and Chemicals for Bungard Filmstar
UV-filter foil, yellow
Tenting resist
Solder mask
Reference pins for CCD
Fixing pins for Hellas/Filmstar
Stripper for positive and negative photoresists This product mainly consists of caustic soda. It helps removing positive as well as negative photoresists from the PC boards. Compared to stripping with solvents,...
Mô tả ngắn:
Drills and Routers
High quality, precisely grinded carbide drill and routing bits. All models have a reinforced shank of 3,175 mm and are equipped with a distance ring. The distance from the tip to the upper side of the ring is 21 mm. The ring has a diameter of 7.5 mm and is labeled or color-coded accosding to the diameter. The tools are packaged in resealable plastic boxes.
Tungsten Carbide Drills For drilling PCBs.
Two flutes, righthand turn. Diameter: 0.3 ... 3.0 mm in 0.1 mm increments
Contour Routers - RPU Type
For Aluminium routing/milling. Two flutes, upward swarf ejection, fish tail tipped. On-stock diameters:...
Mô tả ngắn:
Presensitized Boards
A value concept for quality.
Our special quality can be measured in the following facts:
We use first-choice laminates approved and certified by UL, NEMA, DIN, IEC and others.
Several types of laminates such as FR2, FR3, CEM1, FR4 and PTFE are available in different thicknesses and copper clads. FR 4 e.g is available in thicknesses of 0.5, 0.8, 1.0, 1.6, 2.0 and 2.5 mm with either 18, 35 or 70 microns Copper. The max. panel size is 510 x 1150 mm. Our cutting service provides sheets down to 50 x 50 mm min. size, with an accuracy of 0.1 mm.
Photoresist
We coat the laminates with a special positive working liquid resist made after our own recipe. The resist features highest exposure sensitivity, short processing turns and large safety tolerannces. The equal and dust-free...
Mô tả ngắn:
Rivets
It's so easy - because it's BUNGARD.
With our high quality rivets and our famous FAVORIT you will ever get the best results.
Standard:
Tubular Rivets according to DIN 7340,
Form A
Material:
Copper, blank
New !
For the Bungard CCD we offer special brass tubular rivets with outer diameter 3.0 mm. With a special tool for Favorit you can use these rivets to arrange and fix multilayer boards before pressing.
Similar, but of shorter length are the fixing pins for Hellas/Filmstar to fix the layout to the pcb durcing exposure.
Measures:
Inner diameter
Outer diameter
+/- 0.03 mm
Length
+/- 0.10 mm
Head...
Mô tả ngắn:
SMD Templates
for solder paste application
In SMD-Technology, the question of how to apply the solder paste is gaining more and more importance.
As far as screen printing is concerned, one has to mention the efforts for the preparation and maintenance of the screen as well as the questions of its wear out and of the achieved thickness of the paste.
We think that the actual tendency is to go away from screen printing and move towards printing by templates.
The reasons for this change seem to be obvious. To state only some of a template's advantages, one had to mention the uniformity of the print, the thickness of the transferred paste and the higher durability. But up to now there was one principal problem with templates: They were not easily available.
From now...