26/87 Nguyễn Khang, P. Yên Hòa, Q. Cầu Giấy, Hà Nội.
maitek@maitek.vn
0906182358

Gợi ý từ khóa:
maitek, bungard, CCD2, CCD ATC, CCD MTC, SMT, PCB

Spidé

Lò hàn HA08

Mã sản phẩm: HA08

Liên hệ

Chính sách

Giao hàng toàn quốc

Bảo hành 12 tháng theo tiêu chuẩn nhà sản xuất

Cam kết

Hàng mới 100%, chính hãng sản xuất.

Cung cấp đầy đủ chứng từ, hóa đơn, CO, CQ theo yêu cầu

Giao hàng miễn phí toàn quốc với đơn hàng >10 triệu

Hỗ trợ tư vấn, kỹ thuật 24/7

Chính sách bảo hành tiêu chuẩn và gia hạn bảo hành theo yêu cầu.

Chi tiết sản phẩm

HA08 forced air convection/quartz reflow oven, 440 x 360mm

Technical information

• Power req.: 208/240 V1 phase 50/60 Hz.
• Rated power max. 3950 W.
• Max. Substrate surface: 440 mm x 360 mm.
• Number of heating zones: 2, microprocessor controlled.
• Preheat time:0-999 sec.
• Preheat temp: 60-160°C.
• Reflow Time: 0-999 sec.
• Reflow temp: 90-300°C.
• Heat up time to thermal stabilization: approx 10 min.
• Net weight: 34 kg

All specifications are subject tot change without notice.
Warranty: 12 months.
Connection inert gas N2

Description

• Hot air / quartz oven.
• Outstanding reflow soldering quality for SMD and hybrid
• Cures SMD adhesive
• Two heating zones
• Microprocessor controlled

SẢN PHẨM MỚI

Máy đếm linh kiện điện tử I'Magic

3.300₫

Mã sản phẩm: chưa rõ
Thương hiệu: NAM A
Mô tả ngắn: 1. Introduction I’Magic Counter is the most multi functional component Smart counter system in the Nama Electronics Korea to provide. This system has all in one system that can count for SMD, Axial & Radial components parts. ...

Máy đếm linh kiện điện tử Magic M/S

2.600₫

Mã sản phẩm: chưa rõ
Thương hiệu: NAM A
Mô tả ngắn: Model Magic S ( Semi-auto) Magic M (Manual ) 1. Manual Counter ● ● 2. Motorized (~2,000g reel) ● 3. SMD, Axial, Radial ● ● 4. 2mm Hole Pitch (op) ● ● 5. Barcode Scanner / Printer ● ● 6. Last...

Máy đếm linh kiện điện tử Giga / Giga S

2.600₫

Mã sản phẩm: chưa rõ
Thương hiệu: NAM A
Mô tả ngắn: 1. Fearture Double-check feature ensures accuracy Pocket Check(Missing Parts-Only Giga S) feature stops counting and stop or pass depending on setting when an empty pocket is encountered. Adjustable pocket check sensor height unlike other products adopt fixed sensor height Stepping Motor(Semi Permanent Product) instead of AC motor which needs to be replaced periodically Can complete a 5,000 part reel in 60 seconds(with pitch = 1) 3 Play modes (Short, Normal, Auto-alighment) Count forward and backward Audible alarm indicates preset count has been reached Built in memory allows you to preset count Q'ty Accommodates to 440mm diameter. Anti-Static Connector Multi Interface (USB Ports(op), RS-232C Ports,Extra DC Adaptor Port) Control Beep Sound Free Power Volatage(110-220V) Auto Power Sleep Mode Various Accessories (Lable Printer/Barcode Printer/Barcode Scanner/Foot remote control)...

Máy đếm linh kiện điện tử Mega

1.300₫

Mã sản phẩm: chưa rõ
Thương hiệu: NAM A
Mô tả ngắn: Specification for Mega 1. Digital Micro-Controlled : Easy operating 2. 0201,1005. 8mm ~72mm all type of SMD devices available. 3. Beep signal as it finish working 4. Speed : 10,000 pcs/sec (by high Qualified custom sensor) 5. SMD Pitch Program. ( Automatic program transaction ) 6. Auto Sleep Mode 7. Non-necessary arrangment for device width "One Touch Reek Clamp" 8. Label Printer : Company name/Date/Time/Qty ( built-in Clock unit ) 9. Accessory : Handle for Operation 10. Dimensions : 780(L) x 230(W) x 130(H)mm FUNCTION Mega Remarks 1 ...

Máy kiểm tra quang 3D-AOI A-510

Liên hệ

Mã sản phẩm: chưa rõ
Thương hiệu: Sinictek
Mô tả ngắn: 3DAOI A-510 Name: in-line 3D AUTOMATED OPTICAL INSPECTION Model: A510 Specifications: monorail SIZE: 450 x450 mm (inspection area) Product Features TECHNICAL PARAMETERS: Inspection Principle: Sine white projection PMP inspection Defect inspections: Missing parts, offset, rotation, three-dimensional polarity, upside down, OCV , side standing, tombstone, poor soldering, etc. Solder inspection: Solder tip, solder volume percentage, excessive solder, insufficient solder, bridge, hole plugging, solder filet, pad contamination, etc. Smallest component: 01005. Accuracy: XY (Resolution)：10um. Repeatability: height：≤1um （3 Sigma）;volume/acreage：<1%（3 Sigma）. Maximum Loading PCB Size(X*Y): 450x450mm. Inspection Speed: 0.45 SEC/FOV. Mark-point Detection Time: 0.5sec/piece. MaximuminspectionHight: 10mm. Maximum height of component on PCB: 50mm. MaximumPCB Warpage: ±5mm. Operating System Support: Windows 10 Professional (64 bit). Equipment Dimension and weight: W1000xD1174xH1550.

Máy kiểm tra 3D-SPI T-3010a

Liên hệ

Mã sản phẩm: chưa rõ
Thương hiệu: Sinictek
Mô tả ngắn: T-3010a Name: Large platein-line 3D Solder Paste Inspection Model: T-3010 Size: 700x600mm (Detection area) Product Features TECHNICAL PARAMETERS: Inspection Principle: Programmable phase contour modulation measurement techniques(PSLM PMP) Inspection type:Volume, area, height, XY offset, shape, etc. Defect Types:shift, excessive solder, insufficient solder, offset, deformed shape, etc. Smallest component: 0201. Accuracy: XY=10 um,Height = 0.37 um. Repeatability: height：≤1um （4 Sigma）;volume/acreage：<1%（4 Sigma）. Maximum Loading PCB Size(X*Y):700x600mm. Inspection Speed:1.5 SEC/FOV. Fiducial Detection Time: 0.3sec/piece. Maximum inspection height:±450um（±1200umOption）. Barcode function with traceability. Access IMS system functions. Operating System Support: Windows 7 Professional (64 bit). Five-minute programming, one-click operation. SPC process control.

Máy kiểm tra 3D-SPI T-2010a

Liên hệ

Mã sản phẩm: chưa rõ
Thương hiệu: Sinictek
Mô tả ngắn: T-2010a Name: Big board off-line 3D Solder Paste Inspection Model: T-2010 Size: 460x350mm(Detection area) Product Features TECHNICAL PARAMETERS: Inspection Principle: Programmable phase contour modulation measurement techniques(PSLM PMP) Inspection type:Volume, area, height, XY offset, shape, etc. Defect Types:shift, excessive solder, insufficient solder, offset, deformed shape, etc. Smallest component: 0201. Accuracy: XY=10 um,Height = 0.37 um. Repeatability: height：≤1um （4 Sigma）;volume/acreage：<1%（4 Sigma）. Maximum Loading PCB Size(X*Y):460x350mm. Inspection Speed:1.5 SEC/FOV. Fiducial Detection Time: 0.3sec/piece. Maximum inspection height:±450um（±1200umOption）. Barcode function with traceability. Access IMS system functions. Operating System Support: Windows 7 Professional (64 bit). Five-minute programming, one-click operation. SPC process control.

Máy kiểm tra 3D-SPI T-1010a

Liên hệ

Mã sản phẩm: chưa rõ
Thương hiệu: Sinictek
Mô tả ngắn: T-1010a Name: Off-line 3D Solder Paste Inspection Model: T-1010 Size: 350 x250 mm (inspection area) Product Features TECHNICAL PARAMETERS: Inspection Principle: Programmable phase contour modulation measurement techniques(PSLM PMP) Inspection type:Volume, area, height, XY offset, shape, etc. Defect Types:shift, excessive solder, insufficient solder, offset, deformed shape, etc. Smallest component: 0201. Accuracy: XY=10 um,Height = 0.37 um. Repeatability: height：≤1um （4 Sigma）;volume/acreage：<1%（4 Sigma）. Maximum Loading PCB Size(X*Y):350x250mm. Inspection Speed:1.5 SEC/FOV. Fiducial Detection Time: 0.3sec/piece. Maximum inspection height:±450um（±1200umOption）. Barcode function with traceability. Access IMS system functions. Operating System Support: Windows 7 Professional (64 bit). Five-minute programming, one-click operation. SPC process control.

Máy kiểm tra 3D-SPI InSPIre-1200plus

Liên hệ

Mã sản phẩm: chưa rõ
Thương hiệu: Sinictek
Mô tả ngắn: InSPIre-1200plus Name: Large platein-line 3D Solder Paste Inspection Model: InSPIre-1200plus Specifications: monorail Size: 1200 x550 mm (Detection area) Product Features TECHNICAL PARAMETERS: Inspection Principle: Programmable phase contour modulation measurement techniques(PSLM PMP) Inspection type:Volume, area, height, XY offset, shape, etc. Defect Types:shift, excessive solder, insufficient solder, offset, deformed shape, etc. Smallest component: 0402. Accuracy: XY=10 um,Height = 0.37 um. Repeatability: height：≤1um （4 Sigma）;volume/acreage：<1%（4 Sigma）. Maximum Loading PCB Size(X*Y):1200x550mm. Inspection Speed: 0.35 SEC/FOV. Fiducial Detection Time: 0.3sec/piece. Maximum inspection height:±450um（±1200umOption）. RGB Tune patented technology. D-lighting patented technology. Dynamic and static warpage compensation. Barcode function with traceability. Closed loop to printers. Badmark transfer function to mounters. Access IMS system functions. Operating System Support: Windows 7 Professional (64 bit). ...

Máy kiểm tra 3D-SPI InSPIre-1200

Liên hệ

Mã sản phẩm: chưa rõ
Thương hiệu: Sinictek
Mô tả ngắn: InSPIre-1200 Name: Large platein-line 3D Solder Paste Inspection Model: InSPIre-1200 Specifications: monorail Size: 1200 x550 mm (Inspection area) Product Features TECHNICAL PARAMETERS: Inspection Principle: Programmable phase contour modulation measurement techniques(PSLM PMP) Inspection type:Volume, area, height, XY offset, shape, etc. Defect Types:shift, excessive solder, insufficient solder, offset, deformed shape, etc. Smallest component: 01005. Accuracy: XY=10 um,Height = 0.37 um. Repeatability: height：≤1um （4 Sigma）;volume/acreage：<1%（4 Sigma）. Maximum Loading PCB Size(X*Y):1200x550mm. Inspection Speed: 0.35 SEC/FOV. Mark-point Detection Time: 0.3sec/piece. Maximum detection height:±450um（±1200umOption）. RGB Tune patented technology. D-lighting patented technology. Dynamic shape function with static prevent warping function. Barcode function with traceability. Closed loop to printers. Badmark transfer function to mounters. Access IMS system functions. Operating System Support: Windows 7 Professional...

Spidé

Lò hàn HA08

Chính sách

Cam kết

Chi tiết sản phẩm

HA08 forced air convection/quartz reflow oven, 440 x 360mm

Technical information

Description

SẢN PHẨM MỚI

Giao hàng

CAM KẾT CHÍNH HÃNG

HỖ TRỢ TƯ VẤN

Hotline