Mô tả ngắn:
Hệ thống kiểm tra X-ray để bàn chất lượng nhất
Hệ thống kiểm tra X-ray TruView™ Prime là hệ thống chụp X-quang cơ giới hóa hoàn toàn, đượcphát triển để đáp ứng những yêu cầu nghiêm ngặt trong phân tích chất bán dẫn, kiểm tra QFN và BGA, kiểm tra lắp rắp điện tử và chất lượng chung. Hệ thống TruView™ Prime là ứng dụng riêng dành cho các vật mẫu có kích thước 12”x12”.
Hệ thống để bàn và vô cùng chất lượng
Trong nhiều năm, các đội kỹ thuật đã phải khó khăn chọn lựa giữa một hệ thông kiểm tra x-ray lớn, cho ra chất lượng hình ảnh tốt với một hệ thống x-quang...
Mô tả ngắn:
Hệ thống kiểm tra yếu tố X-quang nhỏ gọn hoàn hảo
Hệ thống kiểm tra X-quang TruView™ Cube mới là một hệ thống chụp X-quang cơ giới hóa hoàn toàn được phát triển để đáp ứng các yêu cầu chặt chẽ trong lắp ráp điện tử và kiểm tra thành phần. Đối với những nơi có không gian nhỏ hẹp thì TruView™ Cube X-ray sẽ rất vừa vặn trên chiếc bàn trong phòng nghiên cứu của bạn.
Tối ưu và đem lại hiệu quả chi phí
Chúng tôi hiểu rằng quá trình mua một chiếc máy x-quang là rất phức tạp. Trước tiên, bạn cần phải dò tìm trong một núi các thuật ngữ kỹ thuật để...
Mô tả ngắn:
Thông số kỹ thuật máy gắp đặt linh kiện NeoDen 3V
Thông tin chung
NeoDen3V là phiên bản nâng cấp của dòng máy TM245P series.
Máy có 2 đầu hút, 46 khe feeder, hệ thống vision, hệ thống đặt PCB linh hoạt, là dòng máy phù hợp cho chế thử, sản xuất vừa và nhỏ với chi phí đầu tư và sản xuất rất hợp lý.
Đặc điểm
2 đầu hút, hệ thống vision
...
Mô tả ngắn:
NeoDen4--- Máy gắp đặt với hệ thống camera (rail điều chỉnh tự động)
Sản phẩm
NeoDen4 là dòng máy mới rất được mong chờ của Neoden, đây là hệ thống máy gắp đặt tự động cùng hệ thống quét ảnh tự động.
Là một nhà thiết kế và phát triển máy PnP chuyên nghiệp, Neoden them gia ngành công nghiệp SMT từ năm 2010. Neoden 4 bao gồm hệ thống camera kép, rails tự động, feeders điện tự động và 4 đầu hút, hỗ trợ tới linh kiện 0201, BGA, QFN, và có khả năng đáp ứng cho LED 0.8m/1.2m/1.5m LED. NeoDen4 là sư lựa chọn hàng đầu bởi độ chính xác cao, tốc độ, sự ổn...
Mô tả ngắn:
Máy phay khoan mạch Bungard CCD/MTC là dòng máy chất lượng cao với chức năng thay dao bán tự động (MTC = manual tool change).
CCD/MTC khác dòng máy CCD/2 bởi vùng làm việc rộng hơn (325x495mm so với 270x325mm) và bởi bộ điều khiển độc lập.
So sánh với dòng máy ATC, phần mềm sẽ ngắt hoạt động trong suốt quá trình thay dao bằng tay (xoay núm vặn 1/4 vòng, động cơ sẽ hoạt động trở lại và nhớ vị trí trước khi thay dao).
Với đầu khoan mạnh mẽ, thân máy vững chắc, Bungard CCD/MTC hoàn hảo cho việc định tuyến, khắc trên vật liệu nhựa, nhôm hay cá loại thép khác. 19" rack board cũng có thể thực hiện trên máy CCD/MTC.
Thông số kỹ thuật:
Nguồn cấp:
110-240...
Mô tả ngắn:
CLEVER DISPENSE 06 HC DK
The CLEVER DISPENSE 06 HC embodies a professional dispenser for applications that require highest accuracy and a maximum control of material temperature and viscosity. This dispenser allows heating and cooling (temperature control) of the dispensing nozzle and cartridge. The all-electronic dispensers whose dispensing pressure, temperature and retract vacuum are program-controlled rely on time-pressure-technology. This allows reliable dispensing of very small dots and lines of liquid to pasty material either as 1K-type or 2K-type. You can add your own material to the already existing material library to define essential material parameter and limit values. To ensure a stable process, this device set includes a tempering module for the nozzle — an integrated feature of the dispensing head. Optionally, a cartridge tempering module can be attached to the CLEVER DISPENSE 06 HC which allows the material temperature to be adjusted and controlled. Furthermore, a USB...
Mô tả ngắn:
CLEVER DISPENSE 06 H DK
The CLEVER DISPENSE 06 H is a professional dispenser for applications that require highest accuracy and a maximum control of material viscosity. These dispensers allow heating of the dispensing nozzle and cartridge. The fully electronic dispensers whose dispensing pressure, temperature and retract vacuum, are program-controlled, use the volumetric time-pressure-technology. This allows reliable dispensing of very small dots and lines of liquid to pasty material either as 1K-type or 2K-type. You can add your own material to the already existing material library to define essential material parameter and limit values. Nozzle heaters are already integrated in the dispensing heads. Furthermore, the cartridge heater can be attached to the CLEVER DISPENSE 06 H which allows the material temperature to be adjusted and controlled. A USB or a TCP/IP interface is provided for communication between dispenser and process computer.
Product variants in the shop
...
Mô tả ngắn:
CLEVER DISPENSE 06 H DPH
The CLEVER DISPENSE 06 H is a professional dispenser for applications that require highest accuracy and a maximum control of material viscosity. These dispensers allow heating of the dispensing nozzle and cartridge. The CLEVER DISPENSE 06 H DP Sets are designed for manual dispensing operations. The all-electronic dispensers whose dispensing pressure, temperature and retract vacuum are program-controlled use the time-pressure-technology. This allows reliable dispensing of very small dots and lines of liquid to pasty material either as 1K-type or 2K-type. In addition, a sensor measures the material temperature inside the dispensing pen and the control unit compensates the material-specific change in viscosity. You can add your own material to the already existing material library to define essential material parameter and limit values.
Content
Control unit CLEVER DISPENSE 06
Dispensing pen (size of choice) with integrated nozzle heater and connecting...
Mô tả ngắn:
CLEVER DISPENSE 06 H DP
The CLEVER DISPENSE 06 H is a professional dispenser for applications that require highest accuracy and a maximum control of material viscosity. The CLEVER DISPENSE 06 H DP Sets are designed for manual dispensing operations.
The all-electronic dispensers whose dispensing pressure, temperature and retract vacuum are program-controlled rely on time-pressure-technology. This allows reliable dispensing of very small dots and lines of liquid to pasty material either as 1K-type or 2K-type. In addition, a sensor measures the material temperature inside the dispensing pen and the control unit compensates the material-specific change in viscosity. You can add your own material to the already existing material library to define essential material parameter and limit values.
Product variants in the shop
CD06.0101
CLEVER DISPENSE 06 H DP 3...
Mô tả ngắn:
PROFI DISPENSE 06 H
PROFI DISPENSE 06 H are professional dispensing devices equipped with the same technology as the CLEVER DISPENSE 06 H. With their extremely flat housing format and the remote dispensing head these devices are the professional solution to be integrated in automation technology. In application of dispensing technology in mechanical engineering long hoses may occur between dispensing control and dispensing head. To avoid associated disadvantages, the control electronics and dispensing pneumatic (PM 06) of the PROFI DISPENSE 06 are divided into two individual modules. The main benefits include the small dimensions of the control unit and pneumatic module as well as its ability to dispense with accuracy. All application parameter like dispensing pressure, retract vacuum or nozzle- and cartridge temperature are parameterized by the PC or the system control. This provides complete control of the dispensing process. The devices are designed for dispensing small dots...
Mô tả ngắn:
SMART DISPENSE 06 DP
The SMART DISPENSE 06 is a professional dispensing device for manual tasks where high precision and repeat accuracy are essential. It’s easy to switch between and set up the various base parameters. Temperature insulated dispensing pens are available for common cartridge sizes in order to prevent the material from heating up during the dispensing application. Furthermore, 1K material can be processed reliably, whether in liquid or paste form. For materials with a low viscosity, the formation of drops at the dispensing needle is prevented through a retract vacuum.
Product variants in the shop
SD06.0101
SMART DISPENSE 06 DP 3
1 2 3 4 5 6 7 8 9 10 ...
Mô tả ngắn:
EXPERT 10.6 HXV
Rework Station with 5,300 W hybrid under-heating system. The heating area of 450 x 420 mm 2 is adjustable to PCB size. Automated SMD placement process by Auto Vision Placer (AVP) incl. EASYSOLDER 07 software package and DBL 06 control unit with six high resolution sensors inputs for thermocouples (Type K).
This system is particularly suitable for large size PCBs like PCs, Laptops and Server Boards with small up to very big components.
Product variants in the shop
DB00.1066
EXPERT 10.6 HXV
1 2 3 4 5 6 7 8 9 10
x 1
auf Anfrage
...
Mô tả ngắn:
EXPERT 10.6 HV
Rework Station with 3,300W hybrid under heater. The heating area of 275 x 245 mm² is adjustable to PCB size. Automated SMD placement process by Auto Vision Placer (AVP) incl. EASYSOLDER software package and DBL 06 control unit with six high resolution sensors inputs for thermocouples (Type K). This system is particularly suitable for mid-size and large PCBs with fine-pitch components of varying package dimensions.
Product variants in the shop
DB00.1065
EXPERT 10.6 HV
1 2 3 4 5 6 7 8 9 10
x 1
auf Anfrage
Content
Tool set for dispensing, placing,...
Mô tả ngắn:
HOTBEAM 05
The high performing under heater in IR technology. This device is perfectly suitable for hand soldering tasks on mid-size and heavy PCB. The under-heating system can be usedsimply and comfortably in the various operating modes (consistent power, consistent temperature and profile) via the intuitive menu navigation. The innovative heating-management system ensures a reproducible circuit board temperature without overshooting at the highest long-term stability.
The Auto-Profiler feature determines required device settings (profile) automatically for the user. The exact desired circuit board temperature is attained by executing the profile learned automatically by the device. Working processes become safer and more efficient. The IR lamps, which are protected by a glass plate, are independently switchable. This makes cleaning of the hot area easy and simple.Furthermore, the under-heating system can control devices (e.g. for removal by suction) or configure them in such a way that they become activated by...
Mô tả ngắn:
HOTBEAM 04
The HOTBEAM 04 is an extremely compact and efficient under heater. Powered by infrared technology, a 105 x 130 mm² heating area is provided. The under-heating system, which has been tried and tested for many years, was developed for stable, reliable and precise preheating tasks. All operations can be carried out with this device safely and with precision.
Various operating modes, e.g. for consistent power, consistent temperature and profiles, can be operated easily.The Auto-Profiler feature determines required device settings (profile) automatically for the user. The innovative heating-management system guarantees the highest degree of reliability. Furthermore, the under-heating system cancontrol devices (e.g. for removal by suction) or configure them in such a way that they become activated by external devices (SPS or foot switches). The EASYBEAM software allows for the sorting, editing and writing of profiles via a USB connection.
Product variants in the shop...
Mô tả ngắn:
EXPERT 05.6 IXH
The Rework station with 2,000 W heating power in IR technology allows uniform heating over an area of 185 x 245 mm² and prevents mechanical stress due to temperature differences during the process. The high-resolution camera delivers fast, accurate and reproducible placement results. Even the smallest components from a size of 1x1 mm 2 can be repaired and placed. User-friendly handling is provided by the touch-enabled EASYSOLDER 07 software. Reflow profiles with individual temperature parameters can be created, edited and saved and enable high process reliability and repeatable soldering. The Expert 05.6 IXH is a precise, cost-effective solution for the complete rework process on one unit.
Content
Two pens with magazine for soldering, residual solder removal and placing
Solder nozzle 7 mm, BGA soldering tool 27 x 27 mm²
Thermocouple sensor (Type K)
Two PCB magnet holder 40.5mm (standard)...
Mô tả ngắn:
Large CO 2 laser cutting M/C
CO2 laser cutter is suitable for cutting non-metal materials.
It is useful in advertising industry for cutting acrylic, wood, paper, fabric and cotton materials.
Features
• Firm composition guarantees great stability in overall process
• Simple and user-friendly design, easy operation, fast cutting speed, open structure that views working status.
• Available work area 1300mm×2500mm (OR1350mm×2000mm)
• Suitable for wide range of precision cutting of non-metal sheet metal
• Auto focus alignment available. It guarantees the most suitable focus and cutting effect for materials of different thickness
• Fast ventilation with top/bottom multi-ventilators
Technical Data
Laser type
Glass tube CO2 laser
Laser output power
...
Mô tả ngắn:
Non-metal/metal CO 2 laser Cutting M/C
CO2 laser cutting machine is suitable for cutting non-metal materials.
It is useful for cutting acryl, wood, paper, fabric and cotton materials.
Features
Precision cutting for thin metal plate as well as high speed cutting for non-metal solid materials including wood, acryl, 2-color plate, plate cake, etc. It can be used for various purposes. Especially it is suitable for advertising which requires even processing for metal materials. 150W/180W CO2 glass tube is installed for high output, light speed and mass. Also it guarantees well-focused cutting. Stable output, long lifespan and less maintenance cost. Depending on the cutting system type, it selects the best cutting distance which can prevent uneven cutting of different thicknesses. 6.3-inch display measurement control...
Mô tả ngắn:
Non-metal CO 2 laser cutting M/C
CO2 laser cutting machine is suitable for cutting non-metal materials.
It is useful for cutting acryl, wood, paper, fabric and cotton materials.
SKL-CUCO2_160100II
• Double head system of double work efficiency
• Online/offline operation mode
• Compatible with various image formats
• Suitable for cutting large area
• Convenient panel control mode
Technical Data
Item
Measurement
Laser type
...
Mô tả ngắn:
Scan head laser welding M/C
It applies high speed digital scan head for fast and precision welding.
Using the exclusive program, it is powerful and easy to use. It is suitable for precision welding of small electronic devices such as mobile phone case and compact motor.
SKL-SW220/SW400/SW600
• High speed scan head applied, great precision
• High speed of 7000mm/sec and high production efficiency
• Great stability
• Easy-to-use and powerful performance
• Compatible with various image formats
...
Mô tả ngắn:
Adv.laser welding M/C
It is suitable for welding advertising billboards.
All-in-one design makes the laser head move freely by controlling the optical path through 2D work station. It is easy and convenient to convert and adjust during welding, its ergonomic design is easy to use and user fatigue is less. This product targets advertising industry for which the optical path is designed with more depth, more elasticity and wider welding range.
SKL-W220/W400
• Ergonomic design, easy operation, less fatigue
• Easy-to-use program, powerful functions
• Smooth welding surface
• Great elasticity of wider welding range
• Suitable for welding various irregular letter designs
• F=200 focus lens, wider welding range available
• Easy to install and operate
...
Mô tả ngắn:
Jewelry laser welding M/C
Jewelry welding machine is suitable mainly for electronics and jewelry business.
It is used for gold/silver jewelry, electronic part repair and bubble spot welding. Its ergonomic design applies the world class parts to increase the product stability and durability. The device is compact and small, easy to move and install. It is easy to use and performs excellent welding. It is safe and stable and does not easily break
SKL-JW220W
• Simple and easy operation
• Stable performance for 24-hour operation
• Less alteration after welding
• Low maintenance cost
• 8-million hitting lamp used
...
Mô tả ngắn:
Mould welding M/C
Laser mould welding machine welds a damaged part of a mold with the welding rod and hyperthermal energy generated in a short time using laser.
It makes a surface smooth through spark and grinding after welding. It generates less bubble, crack, damage and wear and precise welding is possible. Area affected by heat is small therefore precision mold is not altered. Welding depth is deep and the exterior is firm and smooth. Great dissolution doesn’t leave welding mark. The material melts in the welding area which generates no groove on the part where the mold is contacted.
SKL-MW220W/400W
• Simple and easy operation
• Stable performance for 24-hour operation
• Low maintenance cost
• Less alteration after welding
• 8-million hitting lamp used ...